No.1 Abs Warning Light Or Brake System Warning Light Does Not Illuminate With Ignition Switch On: Notes

When performing an asterisk (*) troubleshooting inspection, shake the wiring harness and connectors while doing the inspection to discover whether poor contact points are the cause of any intermittent malfunctions. If there is a problem, check to make sure connectors, terminals and wiring harness are connected correctly and undamaged.

NO.1 ABS WARNING LIGHT OR BRAKE SYSTEM WARNING LIGHT DOES NOT ILLUMINATE WITH IGNITION SWITCH ON - TROUBLE SHOOTING HINTS

1	ABS warning light or BRAKE system warning light does not illuminate with ignition switch on.
[TROUBLESHOOTING HINTS] ABS warning light circuit open or shorted to ground. BRAKE system warning light circuit open or shorted to ground.