LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B4000 SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 615 (Exhaust System (2.3L)) >> Muffler Inlet Pipe Removal/Installation - 2.3L

Muffler Inlet Pipe Removal/Installation - 2.3L

WARNING: This page is about a different car, the 2005 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle on a hoist. See LIFTING .
  2. Remove the bolts.
  3. Remove the exhaust inlet pipe nuts and gasket.
  4. Position the exhaust inlet pipe and install the bolts.

    Tightening torque 

    34-46 N.m { 3.47-4.69 kgf.m, 25-33 ft.lbf} 

  5. Install a new exhaust converter inlet pipe gasket and install the nuts.
    Fig 1: Installing Exhaust Converter Inlet Pipe Gasket Nuts - With Torque Specification
    G03729138Courtesy of MAZDA MOTORS CORP.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals