LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B4000 SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 611 (Cooling System (2.3L)) >> Radiator Leak Test Inspection - 2.3L

Radiator Leak Test Inspection - 2.3L

WARNING: This page is about a different car, the 2005 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Never leak-test an aluminum radiator in the same water that copper/brass radiators are tested in. Flux and caustic cleaners may be present in the cleaning tank and they will damage aluminum radiators.
NOTE:
  • Always install plugs in the oil cooler fittings before leak-testing or cleaning any radiator.

    Clean the radiator before leak-testing to avoid contamination of the tank.

  1. Remove radiator.
  2. Leak-test the radiator in clean water with 138 kPa (20 psi) air pressure.
scientia non olet · About LEMON Manuals