LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B4000 SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 611 (Cooling System (2.3L)) >> Engine Coolant Flushing - 2.3L >> Engine and Radiator

Engine and Radiator

WARNING: This page is about a different car, the 2005 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Do not open the cooling system while it is hot or while the engine is running.
  1. Drain the cooling system. See ENGINE COOLANT REPLACEMENT - 2.3L  .
  2. Remove the thermostat.
  3. Install the thermostat housing without the thermostat.
    NOTE:
    • See the cooling system Flusher Manufacturer's Operating Instructions for specific vehicle hook-up.
  4. Use an appropriate cooling system Flusher to flush the engine and radiator.

    Use premium cooling system flush.

  5. Install the thermostat.
  6. Backflush the heater core.
  7. Fill the cooling system. See ENGINE COOLANT REPLACEMENT - 2.3L  .
scientia non olet · About LEMON Manuals