Engine Oil Replacement - 3.0L
WARNING: This page is about a different car, the 2005 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
- Warm up the engine to normal operating temperature.
- Remove the oil filler cap and oil drain plug.
- Drain the oil into a suitable container.
- Install a new gasket and the drain plug.
Tightening torque
23 N.m {17 lb-ft}
- Refill the engine with the specified type and amount of engine oil.
ENGINE OIL CAPACITY
| Liters (US qt., Imp. qt.) | |
|---|---|
| Engine oil replacement (with oil filter) | 4.3 {4.5, 3.8} |
| Engine oil replacement (without oil filter) | 3.8 {4.0, 3.4} |