LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B4000 SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 608 (Engine Mechanical [Service Information 3.0L]) >> Flywheel Removal/Installation - 3.0L >> Installation

Flywheel Removal/Installation - 3.0L: Installation

WARNING: This page is about a different car, the 2005 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the flywheel.
    Fig 1: Installing Flywheel Bolts - With Torque Specification
    G03728456Courtesy of MAZDA MOTORS CORP.
    • Install the six bolts. Tighten the bolts is a crisscross pattern.
  2. Install the clutch. See CLUTCH DISC AND COVER REMOVAL/INSTALLATION .
scientia non olet · About LEMON Manuals