Connecting Rod, Piston & Rings Specifications
WARNING: This page is about a different car, the 2007 Mazda B3000, 2006 Mazda B3000, 2005 Mazda B3000, 2004 Mazda B3000, and 2003 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTING ROD, PISTON & RINGS SPECIFICATIONS
| Item | Specification | |
|---|---|---|
| Connecting Rod | ||
| Piston Pin Bore Diameter | 23.105-23.145 mm (0.9096-0.9112 In.) | |
| Crankshaft Bearing Bore Diameter | 5.15-57.17 mm (2.250-2.251 In.) | |
| Length (Center-to-Center) | 140.46-140.54 mm (5.530-5.533 In.) | |
| Alignment (Bore-to-Bore Max Diff.) | ||
| Twist | 0.075 per 25 mm (0.003 per In.) | |
| Bend | 0.04 per 25 mm (0.0016 per In.) | |
| Side Clearance (Assembled to Crank) | ||
| Standard | 0.15-0.35 mm (0.006-0.014 In.) | |
| Service Limit | 0.36 mm Max. (0.014 In. Max.) | |