LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B4000 SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Engine Mechanical (Service Information AJ)) >> Timing Chain Removal/Installation >> Crankshaft Pulley Lock Bolt Removal Note

Crankshaft Pulley Lock Bolt Removal Note

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor with the pipes still connected.
  2. Hold the crankshaft pulley using the SSTs. 
Fig 1: Holding Crankshaft Pulley
G01052278Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals