LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B4000 SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Mechanical) >> Removal & Installation >> Timing Chain & Sprockets >> Installation

Timing Chain & Sprockets: Installation

WARNING: This page is about a different car, the 2002 Mazda B3000 and 2001 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure No. 1 piston is still at TDC of compression stroke. Assemble timing chain and sprockets so sprocket timing marks are aligned. See Fig 1. Install chain and sprockets as an assembly. Lubricate timing chain and sprockets with engine oil.
  2. Apply RTV sealer to damper keyway. To complete installation, reverse removal procedure. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS .
Fig 1: Aligning Sprocket Timing Marks
G95G26985Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals