LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B4000 SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Air Bag System) >> Removal & Installation >> Seat Belt Buckle Switch >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove appropriate front seat. See FRONT SEAT  . Disconnect seat belt buckle switch electrical connector. Remove seat belt buckle mounting bolt and seat belt buckle switch assembly.
  3. To install, reverse removal procedure. Tighten front seat belt buckle mounting bolt to specification. See TORQUE SPECIFICATIONS  . Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG warning light for proper system function. See SYSTEM OPERATION CHECK  .
scientia non olet · About LEMON Manuals