Valve Tappet Removal/Installation - 4.0L

WARNING: This page is about a different car, the 2005 Mazda B4000. However, it is still accessible from the selected car via links, so may be relevant.

Remove the valve covers. See VALVE COVER - RH REMOVAL/INSTALLATION - 4.0L or See VALVE COVER - LH REMOVAL/INSTALLATION - 4.0L .
Remove the fuel supply manifold. See FUEL INJECTION SUPPLY MANIFOLD AND FUEL INJECTOR - 2.3L REMOVAL/INSTALLATION .
NOTE:
- Mark each camshaft roller follower to ensure its original position during reassembly.
Using the special tool, remove the camshaft roller followers.
NOTE:
- Lubricate the parts with clean engine oil prior to installing.
Fig 1: Removing Camshaft Roller Using Special Tool
Courtesy of MAZDA MOTORS CORP.
To install, reverse the removal procedure.