LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B2300 Automatic >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Instrument Cluster Gauges Removal/Installation

Instrument Cluster Gauges Removal/Installation

WARNING:
  • Illumination bulbs are pressurized and may shatter if improperly handled. Wear eye protection when replacing illumination bulbs.
CAUTION:
  • If gauges are being removed from the instrument cluster, do not remove the gauge pointers. Magnetic gauges cannot be recalibrated.
NOTE:
  • Gauges are replaced as assemblies. They are not available individually.

    Do not reuse instrument gauge clips.

  1. Remove the instrument cluster. See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .
  2. Remove the instrument cluster gauge amplifier.
  3. Remove the seven screws (1).
    NOTE:
    • The side gauge assemblies must be removed before removing the center assembly.
  4. Remove the screws (1) and instrument cluster lens and mask assembly (2).
    Fig 1: Removing Screws & Instrument Cluster Lens And Mask Assembly
    G03731696Courtesy of MAZDA MOTORS CORP.
  5. Gently remove the gauge assemblies.
    Fig 2: Removing Gauge Assemblies
    G03731697Courtesy of MAZDA MOTORS CORP.
  6. Install in reverse order of removal.
scientia non olet · About LEMON Manuals