LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 3 i, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> On-Board Diagnostic [Instrumentation/Driver Info) >> DTC Inspection [Instrument Cluster] >> WDS

DTC Inspection [Instrument Cluster]: WDS

  1. Connect the WDS or equivalent to the DLC-2.
    Fig 1: Identifying DLC-2 Location
    G03635865Courtesy of MAZDA MOTORS CORP.
  2. Verify if any DTCs are displayed.
    • If any DTCs are displayed, perform the troubleshooting according to the corresponding DTC inspection.
  3. Disconnect the WDS or equivalent.
scientia non olet · About LEMON Manuals