Pinpoint Test 17: The High Beam Indicator Is Inoperative

CAUTION:

• Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the connector.

Fig 1: Pinpoint Test 17: The High Beam Indicator Is Inoperative - Test Procedure (Steps 1 & 2)

Courtesy of MAZDA MOTORS CORP.

Fig 2: Pinpoint Test 17: The High Beam Indicator Is Inoperative - Test Procedure (Steps 3 & 4)

Courtesy of MAZDA MOTORS CORP.

Fig 3: Pinpoint Test 17: The High Beam Indicator Is Inoperative - Test Procedure (Step 5)

Courtesy of MAZDA MOTORS CORP.