Rear Side Seat Belt Removal/Installation [5-Door, Sport Wagon]

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

The ELR has a spring that will unwind if the retractor's cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.

NOTE:

Rear side seat belts are built into the rear seat back. See rear seat disassembly/assembly to remove/install the rear side seat belt.