Removal & Installation (Tribute 2.0L)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Disconnect catalytic converter from exhaust manifold. Remove oil dipstick and tube. Remove 6 bolts and 3 nuts and remove exhaust manifold. Disconnect crankshaft position sensor connector. Remove bolt and remove sensor. To install, reverse removal procedure. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS .