Removal & Installation (Tribute)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
Locate CMP sensor (On 2.0L, sensor is located at left rear of cylinder head. On 3.0L, sensor location is not available from manufacturer). To remove, disconnect negative battery cable. Disconnect CMP sensor. Remove bolt. Remove sensor. To install, reverse removal procedure