Removal & Installation (B4000)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Locate CMP sensor in left valve cover. See Fig 1. Disconnect CMP sensor. Remove bolt. Remove sensor. To install, reverse removal procedure.

Fig 1: Identifying Camshaft Position (CMP) Sensor (B4000)

Courtesy of MAZDA MOTORS CORP.