Removal & Installation (B2300)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft Position (CMP) sensor is mounted on top of valve cover at rear. See Fig 1. Disconnect negative battery cable. Disconnect CMP sensor harness connector. Remove CMP sensor mounting bolt. Remove CMP sensor. To install, reverse removal procedure.