LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Engine Controls - Removal, Overhaul & Installation) >> Fuel System >> Fuel Pressure Regulator >> Removal & Installation (B2300, B3000, B4000, Miata, MPV & Tribute)

Removal & Installation (B2300, B3000, B4000, Miata, MPV & Tribute)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

On returnless systems, regulator is inside fuel tank. On all models except Miata, pressure regulator is an integral part of fuel pump. On Miata, pressure regulator is mounted to fuel pump and sending unit assembly and may be replaced seperately. See Fig 1. See appropriate procedure under FUEL PUMP .

Fig 1: Identifying Fuel Pressure Regulator (Miata)
G00143760Courtesy of MAZDA MOTORS CORP.