Removal & Installation (Millenia & 626 2.5L)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
Knock Sensor (KS) is located under upper intake manifold, between cylinder banks. See UPPER INTAKE MANIFOLD for removal and installation procedure of upper intake manifold. Disconnect KS harness connector. Use tool (49-H018-001) to remove and install KS. See Figure. To complete installation, reverse removal procedure.