Removal & Installation (Tribute 2.0L)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Disconnect catalytic converter from exhaust manifold. Remove oil dipstick and tube. Remove 6 bolts and 3 nuts and remove exhaust manifold. Disconnect Crankshaft Position (CKP) sensor harness connector. Remove bolt and CKP sensor. To install, reverse removal procedure using a NEW exhaust manifold gasket. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS .