Removal & Installation (B2300)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft Position (CMP) sensor is mounted on top of valve cover at rear. See Fig 1. Disconnect negative battery cable. Disconnect CMP sensor harness connector. Remove CMP sensor mounting bolt. Remove CMP sensor. To install, reverse removal procedure.