Removal & Installation (B2300, B3000, B4000 & Tribute)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Disconnect Throttle Position (TP) sensor harness connector. Remove splash shield (if equipped) to expose throttle linkage.
- Disconnect throttle cable and cruise control cable (if equipped) from throttle lever on throttle body. Remove air cleaner-to-throttle body air inlet tube. Disconnect canister purge hose from fitting beneath throttle body.
- Remove 4 throttle body bolts. Remove throttle body from upper intake manifold. Install NEW throttle body gasket. To complete installation, reverse removal procedure. See TORQUE SPECIFICATIONS .