Camshaft Oil Clearance Inspection
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Mazda 6, 2007 Mazda 6, 2006 Mazda 6, 2005 Mazda 6, and 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Position plastigage atop the journals in the axial direction.
- Install the camshaft cap. (See TIMING CHAIN (LH) ASSEMBLY NOTE .) (See TIMING CHAIN (RH) ASSEMBLY NOTE .)
- Remove the camshaft cap. (See CAMSHAFT CAP (RH) DISASSEMBLY NOTE .) (See CAMSHAFT CAP (LH) DISASSEMBLY NOTE .)
- Measure the oil clearance.
- If the oil clearance exceeds the maximum clearance, replace the cylinder head.
Standard Clearance
0.025-0.076 mm {0.0010-0.0029 in}
Maximum clearance
0.121 mm {0.00476 in}