LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Automatic Transaxle [Service, Removal & Installation FN4A-El)) >> Oil Cooler Flushing >> Power Flushing >> Inspecting Oil Lines And Clamps

Inspecting Oil Lines And Clamps

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Be sure to inspect the lines (hoses/pipes) for cuts, crimps (pinched), cracks or any other damage before reusing them.
    • If any problems exist, replace lines and clamps.
    CAUTION:
    • Always use new clamps when replacing hoses.