LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Engine Mechanical - 3.0L) >> Mechanical - General >> Cylinder Bore - Out-Of-Round

Cylinder Bore - Out-Of-Round

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the cylinder bore in two directions. The difference is the out-of-round. Refer to SPECIFICATIONS . Verify the out-of-round is within the wear limit and bore the cylinder to the next oversize limit.
    Fig 1: Measuring Cylinder Bore
    G01151272Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals