LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Engine Mechanical - 3.0L) >> Mechanical - General >> Crankshaft - End Play

Crankshaft - End Play

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the crankshaft end play. Use a Dial Indicator with Bracketry to measure crankshaft end play.
  2. Position the crankshaft to the rear of the cylinder block.
  3. Zero the indicator.
    Fig 1: Measuring Crankshaft End Play
    G01151271Courtesy of MAZDA MOTORS CORP.
  4. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play. Refer to SPECIFICATIONS .
    • If crankshaft end play exceeds specifications, install a new crankshaft thrust washer or crankshaft thrust main bearing.
scientia non olet · About LEMON Manuals