LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Engine Mechanical - 3.0L) >> Mechanical - General >> Camshaft - Lobe Lift

Camshaft - Lobe Lift

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a Dial Indicator with Bracketry to measure camshaft intake/exhaust lobe lift.
    1. Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading to figure the camshaft lobe lift.
    2. Refer to SPECIFICATIONS .
    3. If out of specification, install new components as necessary.
      Fig 1: Measuring Camshaft Intake/Exhaust Lobe Lift
      G01151260Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals