LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Engine Mechanical - 3.0L) >> Crankshaft Rear Oil Seal >> Installation

Crankshaft Rear Oil Seal: Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Lubricate the crankshaft rear oil lips with SAE 5W-20 motor oil.
  1. Using the special tools, install the crankshaft rear oil seal.
    Fig 1: Installing Crankshaft Rear Oil Seal
    G01151701Courtesy of MAZDA MOTORS CORP.
  2. Install the flexplate. Refer to FLEXPLATE .
scientia non olet · About LEMON Manuals