LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Engine Mechanical - 3.0L) >> Crankshaft Front Oil Seal >> Removal

Crankshaft Front Oil Seal: Removal

WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft pulley. Refer to CRANKSHAFT PULLEY .
  2. Using the special tool, remove the crankshaft front oil seal.
    Fig 1: Removing Crankshaft Front Oil Seal
    G01151698Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals