Water Pump Drive Belt - 3.0L (4V) Without TENSIONER
WARNING: This page is about a different car, the 2003 Mazda Tribute and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
This vehicle is equipped with:
- A V-ribbed serpentine accessory drive belt.
- An automatic drive belt tensioner.
New drive belts must be of the same type as originally installed.
Check the drive belt condition at 160,934 km (100,000 miles) then after every 24,140 km (15,000 miles).