LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Rear Suspension System) >> Rear Suspension >> Wheel Studs (Rear) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2004 Mazda Tribute, 2003 Mazda Tribute, and 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel bearing. See WHEEL BEARING - 2WD  or WHEEL BEARING - 4WD  .
  2. Press out wheel studs.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals