LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Fuel Gauge Sender Unit Removal/Installation >> Fuel Gauge Sender Unit (Sub) >> Fuel Leak Inspection After Fuel Gauge Sender Unit (SUB) Installation

Fuel Leak Inspection After Fuel Gauge Sender Unit (SUB) Installation

  1. Drive the vehicle from a standstill or brake suddenly 5-6 times  at a low speed.
  2. Stop the vehicle and verify that there is no fuel leakage from the fuel tank.
scientia non olet · About LEMON Manuals