LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Trunk Lid Trim Removal/Installation

Trunk Lid Trim Removal/Installation

  1. While supporting at point A, pull the handle in the direction of the arrow and remove it.
  2. Remove the fasteners, then remove the trunk lid trim.
  3. Install in the reverse order of removal.
    Fig 1: Removing/Installing Trunk Lid Trim
    G01344510Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals