LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Inner Garnish Removal/Installation

Inner Garnish Removal/Installation

  1. Disconnect the negative battery cable.
  2. Pull the inner garnish outward and detach clip A.
  3. Detach the tab.
  4. Disconnect the tweeter connector and remove the inner garnish.
  5. Install in the reverse order of removal.
    Fig 1: Removing/Installing Inner Garnish
    G01344507Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals