LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Column Cover Removal/Installation

Column Cover Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the upper column cover.
  3. Remove the ignition key illumination. (See IGNITION KEY ILLUMINATION BULB REMOVAL/INSTALLATION .)
  4. Remove the screws.
  5. Remove the lower column cover.
  6. Install in the reverse order of removal.
    Fig 1: Removing/Installing Column Cover
    G01344488Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals