LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Mechanical [Intake-Air System] >> Auxiliary Port Valve (APV) Motor Inspection (13B-MSP (High Power)) >> Resistance Inspection

Resistance Inspection

  1. Remove the APV motor. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION  .)
  2. Measure the resistance between the APV motor terminals using an ohmmeter.

    APV motor resistance 8-50 ohms 

    Fig 1: Identifying Auxiliary Port Valve Motor Connector Terminals
    G01345730Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals