LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Panels >> Stay Damper Disposal

Stay Damper Disposal

NOTE:
  • The gas in the stay damper is colorless, odorless, and non-toxic.
  1. Wear protective eye wear.
  2. Lay the stay damper flat.
    Fig 1: Sawing Into Stay Damper
    G01344254Courtesy of MAZDA MOTORS CORP.
  3. Saw 2-3 mm {0.08-0.11 in}  into the stay damper using a hacksaw, and allow the gas to escape from the stay damper.
  4. Verify that the gas has escaped from the stay damper.
  5. Discard the stay damper.
scientia non olet · About LEMON Manuals