LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Panels >> Rear Bumper Removal/Installation >> Rear Bumper Removal Note

Rear Bumper Removal Note

  1. Pull the rear bumper ends (wheel arch) outward to detach from the bumper slider.
CAUTION:
  • When detaching the rear bumper from the bumper slider, the rear bumper could fail and be damaged. Secure the rear bumper so that it does not fall.
    Fig 1: Pulling Rear Bumper Ends (Wheel Arch) Outward To Detach From Bumper Slider
    G01344265Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals