LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Panels >> Fuel-Filler Lid Removal/Installation

Fuel-Filler Lid Removal/Installation

  1. Remove the bolts.
  2. Remove the fuel-filler lid.
    Fig 1: Removing/Installing Fuel-Filler Lid
    G01344255Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
  4. Adjust the fuel-filler lid. (See FUEL-FILLER LID ADJUSTMENT  .)
scientia non olet · About LEMON Manuals