LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Lighting System >> Ashtray Illumination Bulb Removal/Installation

Ashtray Illumination Bulb Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the ashtray panel. (See CONSOLE REMOVAL/INSTALLATION .)
  3. Remove the socket, then remove the ashtray illumination bulb.
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installing Ashtray Illumination Bulb
    G01344605Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals