LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> Roof Molding Installation

Roof Molding Installation

  1. Attach the roof molding to the T-stud at section A.
  2. Hook the roof molding to clips B and press it in to attach.
  3. Attach the roof molding to the T-stud at the rear portion of section A.
    Fig 1: Installing Roof Molding
    G01344478Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals