LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> Cowl Grille Removal/Installation

Cowl Grille Removal/Installation

  1. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM & BLADE REMOVAL/INSTALLATION .)
  2. Disconnect the windshield washer hose. (See WINDSHIELD WASHER HOSE REMOVAL/INSTALLATION .)
  3. Remove the screws.
  4. Remove the weatherstrip.
  5. Remove the cowl grille.
  6. Install in the reverse order of removal.
    Fig 1: Removing/Installing Cowl Grille
    G01344474Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals