LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Horns >> Instrumentation/Driver Info >> Fuel Gauge Sender Unit Inspection >> Fuel Gauge Sender Unit (Sub)

Fuel Gauge Sender Unit (Sub)

  1. Move the float to the topmost and bottommost positions, and verify that the resistance between terminals A and B of the fuel gauge sender unit (sub) and the position of the float are as shown in the figure. See Fig 1.
    • If they are not as shown in the figure, replace the fuel gauge sender unit (sub).
    Fig 1: Verifying Resistance Between Fuel Gauge Sender Unit (Sub) & Position Of Float
    G01344795Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals