LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> MX-5 Miata LS, Standard, Y16MD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info >> Horn Removal/Installation

Horn Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the upper seal board.
  3. Disconnect the horn connector.
  4. Remove the bolt.
  5. Remove the horn.
  6. Install in the reverse order of removal.
    Fig 1: Removing/Installing Horn
    G00997251Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals