LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Specifications & Procedures - Wheel Alignment) >> Wheels & Tires >> Wheel Balance Adjustment >> Remaining Amount Of Unbalance Confirmation

Remaining Amount Of Unbalance Confirmation

WARNING: This page is about a different car, the 2002 Mazda Protege5 and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. After installing the outer and inner balance weights, operate the wheel balancer again.
  2. Confirm that the remaining unbalance does not exceed 10 g {0.35 oz}  at outer and 8 g {0.28 oz}  at inner on either side.
    • If the remaining unbalance exceeds 10 g {0.35 oz}  , perform wheel balance adjustment again.

    Allowable Remaining Unbalance Value (g) 

    Dynamic Unbalance (At Rim): 10 g {0.35 oz} Max. (Outer), 8 g {0.28 oz} Max. (Inner) 

    Static Unbalance (At Rim): 13 g {0.46 oz} Max.