SAS Control Module: Removal
WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, follow air bag service precautions. See AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
- SAS control module is located under center of instrument panel. Remove instrument panel center lower side walls. Disconnect Remove SAS control module connector and remove retaining bolts. See Figure. Remove SAS control module.