Activating System

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Reconnect SAS control module connectors. Reconnect right and left seat belt pretensioner connectors. Reconnect right and left side air bag module connectors. Reconnect passenger-side air bag module connector. Install glove box. Connect clockspring connector. Install steering column covers. Connect negative battery cable. Perform SYSTEM OPERATION CHECK .

Fig 1: Locating Clockspring Connector

Courtesy of MAZDA MOTORS CORP.

Fig 2: Locating Passenger-side Air Bag Connector

Courtesy of MAZDA MOTORS CORP.

Fig 3: Locating Side Air Bag Module Connectors

Courtesy of MAZDA MOTORS CORP.