Detection Condition
WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
DTC is set when PCM detects air flow is more than 45.2 grams/sec. (more than 57.0 grams/sec. if equipped with traction control) when monitoring conditions are met.
Monitoring Conditions
- Engine speed is more than 3000 RPM (more than 2500 RPM if equipped with traction control).
- Engine coolant temperature is more than 158°F (70°C).
- Throttle valve opening angle is more than 75 percent.
This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is available if PCM detects malfunction condition during first drive cycle. Freeze Frame Data is available and DTC is stored in PCM memory.